Stealth Press Tip Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another tip holder for the Stealth Press. Intended for M4 x 8.1 mm Ruthex Inserts and screw-type soldering iron tips
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 127
- Makes
- 2
- Views
- 1,084
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
For some unknown reason, I was dissatisfied with the available tip holders for the Stealth Press by Iconic FAB. So I designed another one.
It's intended for Ruthex M4 x 8.1 mm heat set inserts (5.6 mm hole diameter) and screw-type soldering iron tips. It can further be converted to nut-type soldering iron tips by glueing in M4 headless screws (loctite).
There are six instead of four holes for mounting. I used the part for reference, drilled and melted in two additional M3 heat set inserts into the vertical beam on the Stealth Press.
See 3MF for printing details. STEP file included, if modification is necessary.