SPOOL for 500g of filament- CLICK CONNECT- just 50g to make!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The lightest spare filament spool you can find online! No supports, print two sides and click them into place.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 216
- Makes
- 3
- Views
- 556
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Standard Digital File License
The lightest spare filament spool you can find online! All other versions take 100-150 grams of filament to make. TESTED PRINT
PLUS THIS SPOOL NEEDS NO SCREWS OR GLUE TO CONNECT TWO PARTS. It has locking "mechanism" designed inside of the two connecting parts which once they lock in place the spool feels like its made in one piece and cannot fall apart anymore.
I have made two versions, one with thicker walls that takes only 60 grams of filament to produce, and even lighter one that takes just 50 grams.
Both are easy to print, but I find the 50 grams version even easier to print with materials like ABS and ASA because of potential warping, because I print these in 100% infil.
Both designs have holes on the top edge to bind the filament so it doesn't become loose, and the ones on the bottom edge where you put your filament through to start rewinding.
I printed the ASA version with these settings:
-100% infil
-Sparse infil pattern : Rectilinear
Top and bottom surface pattern: Monotonic
Speeds:
First layer: 60
First layer infil: 80
Inner wall: 150
Outer wall: 150
Internal solid infil: 100
For PLA printing no need for any special settings, I printed in speeds 150-300 and it worked flawlessly.
STEPS FOR CONNECTING:
1. Please insert the male part correctly inside the female part while making sure that the locking parts on the inner side of the spool center align.
2. When you have inserted the male part till the end, put the spool flat on the table and strong press the middle of the spool to connect the lockers.
3. Press the spool until you hear the CLICK sound, which means that the two parts connected.
4. Visual inspect that everything has connected properly, enjoy your spare spool!
This spool was made because I wanted to trade some filaments in smaller quantities with my friend (the ones we don't use much but we would like to have in our collection, like some SILKS and special filaments like wood, marble). That is why it is made to hold only up to 500g grams of filament, depends on material.