The Hobby Shop 18 Cue Push Pin Base and Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective mounting base with snap cover for The Hobby Shop's 18 Cue Push Pin Slats
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 43
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
After making several Quick Plug bases and covers, a buddy asked if I could make it fit The Hobby Shop's 18 cue push pin slats. I uploaded .3mf files for the base for both a Ruthex M3 insert nut like I used, as well as an M3 mounting screw file (2.65mm hole) for choice. We used Ruthex nuts, but they should mount to the plastic base just fine. The cover is provided as a .3mf for MMU customization. Example gcode files are there for no logo (solid surface) and cutout logo like factory Cobra covers. You can easily edit to do a multicolor MMU print like my first example (Overture PETG red and black, upload is without my buddy's handle of The1MC), or leave the cutout like the second example (Prusament Recycled PLA test print)