1 / 2
Towel Holder for Bike Stand / 38mm Pole Mount — image 1
1 / 2

Towel Holder for Bike Stand / 38mm Pole Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A paper towel holder for a bike stand or similar with a 38mm post.

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
106
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Three versions. Wide and narrow vertical print. Or trimmed horizontal print.

I went with the wider vertical version and learned a few things. I printed in PLA+ without brims and couldn't find the print after it had finished. LOL. It was knocked over just as the printer finished. I also just printed with 2 walls and 10% infill and the threads cracked. I epoxied that and used it to avoid a reprint. 

I would recommend PLA+ or PETG with 6 walls and higher infill! Also, given the height of the post, a wide brim and some bed glue might prevent the knockdown I had.

If you want to check the thread fitment, print the small test piece (and cap) before the post. If it fits well, use it to cap the post after that prints!

 

The horizontal print is asymmetrical but will have stronger threads. About 15% less filament used and my slicer shows half the print time. Wins all around.

 

*  The thread happens to be ¾ garden hose thread if some other accessory would be more useful for you!

Tags