1 / 2
FSX to ATX Power Supply Mount /  PSU Adapter — image 1
1 / 2

FSX to ATX Power Supply Mount / PSU Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An adapter to allow mounting and using an FSX power supply in an ATX case.

Rating
5 / 5
Likes
9
Downloads
46
Makes
1
Views
277
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Here is an adapter to allow mounting and using an FSX power supply in an ATX case. 

The screw holes in place of ATX PSU metal threaded holes are sized for steel screws to self-tap (even if not technically self-tapping). In my tests with ABS, they appeared to have a stronger hold than many of the thin sheet-metal threaded holes in power supplies. But they are plastic, so be careful not to strip them out.

 

SUPPORTING YOUR FAVORITE DESIGNERS:

The Amazon links below are affiliate links, and it costs you nothing to use them. If you use an affiliate link to get to Amazon the next time you need to buy something, the designer associated with that link will get a small percentage of any sale made during that browsing session.

So, if a couple of people spend $100 on something they were going to buy anyway, I get a “thank you” vanilla latte for posting these things. If my designs aren't your favorites, please do this for someone else who is. Thanks.
 

BOM: 

INSTRUCTIONS:

  • Print this as a structural part. Meaning, a minimum of 3 layer walls and 20% cubic infill or better. Using the Voron part standard (40% infill, 4-layer walls, 5-layer top and bottom) is probably best.
     
  • ‘Likes’, ‘Follows’ and ‘Downloads’ all help to elevate goods designs, like any other social media. If you like a thing, please click ‘like’.

 

Tags