Mount for Samson mic stand boom
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your Samson mic boom to your desk?
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I didn't have room for the entire mic stand next to my desk so I made a copy of the piece at the top.
You need to remove the screw and washers that hold the boom to the base and attach it to this mount. There is a hole in the bottom that I tapped for an M6 bolt. Then I drilled a hole in the desk and tightened it down.
This iteration is a bit too thick so you only need to use one of the pads from the original stand. I probably wont update this design until mine breaks but feel free to modify or copy.
I recommend using PETG with a high infill. Something over 25% but closer to 50% otherwise it wont take the clamping force. I store it in the upright position and it stays out of the way.