1 / 4
CR-10 SE Fan Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a holder to move the fan further down so that it doesn't rub against the cables.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Did some tinkering again. Added openings and moved the fan further down so that it doesn't rub against the cables. The fan holder is “simply” (no, it isn't) clipped into the opening, but the whole thing needs to be reworked. It goes in very tightly and got cracks. It would also be best to make the bracket in two parts so that it is easier to print and install.
I'm not changing anything for now, as everything is working fine and the small crack is invisible.
The opening for the holder must be at least 150x87 mm.