1 / 4
Small Fiskars knife cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A knife cover for the blade of the small Fiskars knife.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
A knife cover for the blade of the small Fiskars knife.
It's a bit narrower than the actual blade to have a tight fit.
Printed in PLA:
- 2 shells
- 3 bottom and top layers
- 0,2 mm layer height
- infill doesn't matter
- brim plate adhesion was enough to print in place
- normal supports touching only from the buildplate !NOT EVERYWHERE! - you don't want to remove supports from the inside of the cover :)
POSITION THE MODEL VERTICALLY! Best result if the curved edge is on the build plate - like in the picture (the least amount of supports).
For reference - The coin diameter on the picture is 22,5 mm.