1,708 models
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
This is a add on for a basic Work Sharp sharpening system, with this add on you can use any sharpening stone from 3 1/8 inches long all the way up to 6 inch long stones. When printing these components it's important to print the Lead…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
A simple stand for markers of all kind
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Инъекционный пистолет со шприцем. Пистолет для уколов в домашних условиях. Производит автоматический резкий впрыск. Некоторые детали нужно напечатать отдельно и склеить между собой. Из-за сложности модели она требует корректировки деталей…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
Since it can be tricky to accurately hold a block plane’s blade or a chisel correctly for sharpening, this honing guide is designed to help. A chisel should start with one bevel, which is formed on the blade, usually by grinding it at a…
Print approx. €6.21–€7.59 excl. taxPreliminary estimate for one variant
This design of a fair (all sides have equal probability to be rolled), utilizes two prints with different colours, stackt on each other. All sides of the dice are printed flat on the print-bed and then folded into the final dice. Printing…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Safety sign that only exists to warn us about itself. Ive seen some variations of this but couldnt find any to print, so i decided to do my own, print it and hang it at work, waiting to get noticed! :P Make sure to make a colour change at…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
Jig for sharpening of chisels, plane irons and similar. Print instructions: Material: PETG (PA, PC might be a good fit too) Layer height: 0.2 (0.15 should work fine too) Baseplate: Infill: 15% - 20% Honeycomb Perimeter: 3 Top: Infill: 70%…
Print approx. €4.62–€5.64 excl. taxPreliminary estimate for PETGSource material: PET
Tips are appreciated and go towards creating new designs There are a number of bevel gauges that can be bought for very reasonable prices. These tend to cover a select set of bevel angles which are most commonly found on various tools,…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
No additional parts are needed. I used: Material: PLA Supports: No Layer: 0,2 Nozzle: 0,4 Brim: Optional BUT geometry its printer-friendly so it will be okay if you use other configs. AND its symmetrical so it works on both hands. UPDATE…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
!!!This is not a real weapon!!! Hello, Today I have a sharp butterfly knife for you. It is a bowtie knife ideal for cutting boxes. After printing, you need to connect it with pieces of filament, see photo. The ends of the filament piece…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
I was in need of a pencil holder, but instead of downloading some nice model, I decided to spend way too much time and design my own. It looks like a giant pencil sharpener and does not sharpen your pencils at all… ;) There are two…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
This is one of my first attempts to use blender to model. It's a little rough in some aspects.. but considering it is meant to be exaggerated and creepy - I think it adds to it. I made this for my daughter this year - so keep that in mind…
Print approx. €15.50–€18.94 excl. taxPreliminary estimate for one variant
This is a remix of Prusa MK3 Knob. I redesigned this entirely in Fusion360 to add sharper knurling which I like that grip better.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
The cover will protect the studs from rusting. You will have to use raft, because the walls are thin (1 mm). The holes purpose is for removing the cover off the studs. If you have any question, feel free to ask me. :D
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
This is a 0.8 MOD gear 80T for Sharpstar Askar FMA180 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 40T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Adapter to use the Shop-Vac 2.25" attachments on a sharp vacuum cleaner.
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for PETGSource material: PET
Battery cover for Sharp EL-5812 calculator - the calculator was made in the 1970s and still works reliably during everyday use. Over the years, however, it has lost the battery cover and the new one has received today thanks to Prusa…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
This is a quick fix - I do hate sticky tape repairs. So I did a 3D scan of the remote open, drawe some lines in freecad, printed and it works for me. It is not very fancy it just works, see improvements list. I printed it with 0,4 nozzle…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Filter for Sharp KC-G*EUW. Tuned version with significantly better efficient. No supports needed, 0.25mm layer height. Stacked 4x0.5cm parts - split them for better clean possibilities. You can clean it in dishwasher! (just use PETG for…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
Store 1” wide by 18” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
Store ¾” wide by 12” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Protection sleeve for a 2 sided diamond sharpening stone. The diamond Sharpening Tool: https://www.amazon.de/dp/B07WJJLFMX?th=1
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
Minimalist, timeless bowl in a clear and sharp design. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for…
I needed an angle guide for sharpening bigger drill bits on my bench grinder. With this I can move the bit on the grinder table from side to side and tilt it around the table edge. For now I have added only 118 degree tip angle files.…
The arm of the Work Sharp has a tendency to deflect or sag as you apply pressure when sharpening a knife. This simple but effective support block prevents that from happening.
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
The Sharp Branches Vase is a captivating fusion of nature-inspired design and modern aesthetics. Its deep matte black finish showcases intricate, sharp branch-like patterns carved into its surface, creating a bold and sophisticated…
This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…
Update 11/22/25: Adjusted blade pocket size of 65 degrees version from 15 to 14 mm, avoid filament not getting cut properly. A long time ago I discovered pomi's filament cutter but wouldn't want to use it without a box a la wapameeto's .…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
Normally after you catch a fish, you hold it up by the lower lip while you remove the hook and pose for pictures of your big catch. When you're out fishing for predatory fish, like big ocean fish, you need to wear gloves or use a tool…
This is the version 2.0 of my riser for the Work Sharp Ken Onion Blade Grinder, u/timinator6 and I have developed the version 2.0, now with a slider to get the blade closer to the belt maintaining the 0 angle! Also, the Slider finishes on…
sharp arrow head with hooks material used: PCTG infill: 100%
Simply slice this STL with your preferred settings and run it. Installing is as simple as slipping your printed part under the clamp from either side. No Adjustments to knife sharpener necessary. Feel free to reach out with any problems…
Description Drill Bit Sharpening Attachment for Angle Grinders – a simple and practical tool for sharpening metal drill bits using an angle grinder. This drill bit sharpener is designed to work with many popular angle grinders. Simply…
This is my "Leading Edge" Sharpening System. NOTE - The LATEST (Major upgraded) version of my system will soon be available as a ready-to-assemble kit from https://www.gritomatic.com . I will not be updating this version on Thingiverse…
Improved design of the house-shaped keychain. All sharp edges have been rounded to make it more comfortable to carry in your pocket. No support required for printing. You should print from the roof side, as the model is positioned. In one…
Need help finding that exact sharpening angle? These are helpful when you suck at sharpening. (sorry the photos are of them on my old anet a8) EDIT: Fixed an issue where the number were not attached to the blocks.
A drift barrier for RC drift cars designed to navigate sharper corners.
When my pharmacy started giving out cardboard sharps disposal containers (which they then refused to accept once they were full), I decided to put together my own sharps containers. I've included two versions on four plates - a square…
Just a small support beam for the clamping arm to add some stability. You can insert it from the side and don't have to be so cautious about the sharpened blade when trying to insert one from the front.
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 100% Filament brand: sunluu Filament color: dosent matter Filament material: pla+ Notes: Print with 85mm/s speed, 215º extrusor…
I saw this on a meme and had to make it! Really works and connects together. 3 Sizes included - find out what fit works for you! Each printer and material is a bit different so I included loose, medium and tight fit models. Think I'm…
Fully Metric Remix of "Better Chisel Sharpening Jig" by @GarageTimeDavid_3790 Changes: Adjusted hex holes from ¼" (11.1125 mm) to 10 mm to fit M6 bolts Adjusted round holes from 8.4 mm / 6.4 mm to 8.0 mm / 6.0 mm respectively
I like the idea of hedgehog pencil holders I found online , but was unhappy with how they were designed. Specifically, I really didn't love that you couldn't put a pencil pointy-tip-down and keep it from resting on the tip. So I designed…
I recommend printing it standing, not on its side, and use supports
The Design I recently picked up Work Sharp's Precision Adjust knife sharpener. It's an incredibly popular first step into proper guided sharpeners. One of the device's few flaws is that the angle adjustment knob tends to move a bit while…
Designed a sharpie clip for a hard hat that doesn't use the slots for face shields.
A FUN ERASER HOLDER THAT ALLOWS YOU TO HAVE ALWAYS A SHARP ERASER!! Share your prints!! The shape of the holder allows to always have a sharp end of the eraser. Simple Assembly STEPS: I used this ERASER : https://amzn.to/3Xae5gQ (This is…
This container is for safely disposing of your utility knife blades. Drop them in through the slot on the top and throw the whole bin away when full. The internal geometry prevents the blades from falling out. Update - 11/18/2025:…
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
Original model worked great, but I don't have 606ZZ ball bearings and needed metrical clamps. So here is a remix working with two 608 bearings (print the Roll.stl twice and glue them together). Additionally I made some versions of the…
This is a jig for sharpening drill bits to 4 facet on a vater grindstone. Makes perfect 4 faset drill bits. Custom Section Category: Tools
Knife sharpening angle guide with 15, 18, 20 and 22 angle
Printing All parts are printable without supports. For Grip and Cover part is brim recommended. Assembly list of non-printed parts 1 pc - rectangular single edge razor blade
flipping upside down in your slicer makes it faster i think
This is a complete set of sharp tabletop dice masters. It includes the following dice: D4 D6 D8 D10 D10 percentile D12 D20 How to use: Print the dice in resin. I suggest to support the dice on all edges facing the buildplate and…
This ultra-lightweight scraper is designed for speed, comfort, and efficiency. The ergonomic grip features four finger slots , giving you maximum leverage and control from the sides so you can press down and pry up without slipping. The…
Extra supports to use with the "Work Sharp Professional Precision Adjust" knife sharpener (or similar sharpeners). Simply put them where needed and extend them to the desired height by unscrewing them. There is a narrow version and a…
I use it on my Adventure Racing backpack Measure the width of your strap, print it and finagle it on the strap. It is hard to put on a strap, but that means it will stay on the strap really well.
Carpenter Pencil Sharpener and Offset Block Easy forming a perfect sharp tip on your Carpenter Pencil can also be turned around and use it as an offset Block.
The protector is printed with PETG and do not need supports. The protector is plugable and work without glue or any other fixation. I have added different .stl files of protectors which should fit to most common thickness of table leaf.…
I liked @William_223753 models but wanted a 17 degree version. I wipped one up in Fusion 360 and this is the result. I made the model from scratch but the design is a copy of William's work. I hope you find it useful. I printed on the…
Very Sharp Knife So Be Careful ! Enjoy it Temp: Noodle: 215 Celsius Bed: 65 Celsius
Print stood up vertically, on the longest thin flat side, with the drainage channels pointing upwards. This helps with the curves on this model, so everything comes out looking nice and smooth. Between 0.12 - 0.2mm layer height (I'd…
Note that this is for skewed chisels (as used by woodworkers for cleaning out dovetail sockets etc), not skew chisels (as used by woodturners). Skewed chisels ( like these ones ) have a single bevel at a steep angle and make it much…
Put under the knife fully closed, then screw the top portion out until it barely touches your knife, a rubber stop is optional. PS: the “mini knife holder” can be used for chefs knives as well, the advantage being that you can draw out…
Einhell axxio 18/125 drill sharpener 135 degree and relief 10 degrees. Feel free to remix - f3d file is added. Remember to wear the protection glasses and use your head ;)
Simple but sturdy base, better ergnomics than just a flat plate on a desk. I added some rubber feet to prevent slipping but double sided tape should work in a pinch. Regular PLA 3 walls 15% infill
This tool is designed to stiffen up the knife clamp arm, I've noticed the clamp arm has some minor vertical play while sharpening larger knives, this tool helps keep a constant angle which in turn creates a sharper edge quicker. Printed…
This model is designed to be added in the same way as the original barrel. Note that if you print it horizontally, you'll have trouble removing the supports inside the barrel. As this is an old model, I can't modify it (it was made on…
Compatible batteries are already available to buy on eBay. However, I already had components to make my own, and I enjoy designing things so I made this. I was also able to make a few of these for the price of one on eBay (since I already…
Wanted to use different (and much cheaper :) ) diamond whetstones in my Work Sharp Benchtop knife sharpener which I really like. Adapter is designed to insert 160x20mm magnetic baseplate for 150x20mm diamond whetstones. These can be…
Due to the detail and curvature, this might be really difficult to properly print on FDM - I did my test (14" one in the photos) on a Resin Printer (Elegoo Mars 2 pro), and came out great! Original covers were borrowed from Quang from…
Clip your Sharpie or Parcelmate to your fridge, or any other magnetic surface. Uses a 10x3mm cylindrical magnet.
This riser support is designed for the Work Sharp Ken Onion Mk.2 Blade Grinding Attachment . The riser makes it easier to maintain a consistent sharpening angle between the knife and the sanding belt, resulting in a noticeably sharper…
this is a 4" abrasive holder for the work sharp precision adjust. I couldn't find a model so this was a roughly thrown together attempt. It works for me but the tolerances are relatively tight.
Saw the original, liked it and printed it for my son cos this is right up his street. The thinner “front” edge on the big hole started peeling a bit off bed though, so it got a bit messy and needed some sanding and tidying to get rid of…
Unfortunately, the blade of the plane has become dull. I found similar sharpening tools, but I didn't like either the angle of the sharpening or the way the blade was held. I designed one that would hold the blades at a 40 degree angle…
I bought myself a gun and realized that i only came with like 10 bullets so i decidet to designe them from scratch i have testet them and they dont need support in the slicer
Use this with my "Build-A-Crossbow (Mini)" model! (I also make blunt-tip arrows)
Two different handles for the "Work Sharp Professional Precision Adjust" knife sharpener. -" Standard " for using the regular abrasives that comes with the sharpener. -" Universal " for using generic ~160mm long abrasives (the ones with…
Slip this on a Sharpie Fine Point pen (aka: a "normal" Sharpie) to use it in a standard pen plotter. Note that regular Sharpies are too long to fit in a carousel-style pen holder. I'll look into updating this for mini-Sharpies eventually.…
My first attempt sculpting in Blender. It should print fine without support. The tree holds 5 Sharpies/other pens. It could be a nice set piece for your desk or at the board gaming table.
I modified DGA's model and gave it tapered ends and a harder edge.
Made this to hold the cheap but effective SATC Premium Diamond Sharpening Stone that you can find on Amazon. It's the 400/1000 grit plate. The measurements on amazon say it's 7.8 by 2.75inches, but it's a little off. I made this so that i…
Easy to print. No supports needed but you might need a brim (depends on your printer). You probably need to turn the models in your slicer in order to print with no supports!
Simple jig. Use M3 screws on top, and an M8 screw and 608Z (or similar) bearings.
Make your own hones or strops for your Lansky® controlled angle sharpening system. I wanted a strop faster than I could get one so I made a handle that will suit the Lansky® sharpener I have. While doing it I realised you could make grits…
Blox fruits - Dark dagger (Roblox) You can justprint it out of PLA 0.15 mm. the tolerances will be such that no need for glue, just insert the blade into the handle. But if you need just put some superglue inside the handle and insert the…
I have a small thicknessplaner and had the great idea to plane oak endgrain. It worked, but now the knifes a dull. New knives are 25€, sharpening almost free. I looked on the Internet how to sharpen theses blades and i found a cool…
Printed in blue PLA at 0.3mm layers and 25% infill standing straight up with organic supports. Works very well.
