Fine Point Sharpie Cap
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.28 – €0.34 net (excluding VAT)
For file: PlainPenCap_0.2mm_PLA_MK3SMMU2S_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.31 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 24 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Just a plain old cap.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 72
- Makes
- 1
- Views
- 404
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It is just a cap.
In case you break or lose the one you have.
Printing Instructions
I couldn't get this to print well without supports, you can print it straight up and down (small end down), but the clip will break off. Best configuration is the orientation in the stl (see screen shots).
- Supports on build plate only.
- Overhang Threshold: 30 (or more)
- Style: Snug