FlexiScraper - Sharp Printbed Scraper
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.64 – €0.78 net (excluding VAT)
For file: FlexiScraper-HOLLOW_0.4n_vh_PLA_MINIIS_45m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 45 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Printbed scraper that allows to get under thin layers easily. Available in three designs.
- Rating
- 4.761 / 5
- Likes
- 765
- Downloads
- 4,481
- Makes
- 56
- Views
- 10,319
- Reviews
- 46
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
ENGLISH
Introducing FlexiScraper: the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With rounded corners for better performance. Choose from three distinct designs: Bestagonal HEX, Wacky VORONOI, and Vanilla HOLLOW, each tailored to your preferences. Can't decide? Print them all!
Printing Instructions:
- Opt for PLA or similar rigid materials, with PETG as a viable alternative.
- Employ variable layer heights for superior slope quality and edge sharpness.
- Increase the number of top layers or set a minimum shell thickness of 1mm to ensure a flawless top surface on slopes.
Experience the convenience and efficiency of FlexiScraper and elevate your printing experience today!
ČESKY
Představuji škrabku FlexiScraper: konečné řešení pro snadný přístup k nízkoprofilovým výtiskům a zbytkům podpory. Vyvinuta s přesností, její ostrý okraj snadno vklouzne pod výtisky. Se zaoblenými rohy pro lepší výkon. Vyberte si ze tří odlišných designů: Bestagonal HEX, Wacky VORONOI a Vanilla HOLLOW, každý přizpůsobený vašim preferencím. Nemůžete se rozhodnout? Vytiskněte si je všechny!
Instrukce k tisku:
- Volte PLA nebo podobné tvrdší materiály, PETG teké funguje dobře.
- Použijte proměnlivou výšku vrstvy pro vynikající kvalitu náběhu.
- Zvyšte počet vrchních vrstev nebo nastavte minimální tloušťku obálky na 1mm, aby byla zajištěna bezchybná vrchní plocha na náběhu.
Zažijte pohodlí a efektivitu FlexiScraper a zdokonalte své pohodlí při tisku ještě dnes!