Shelf Support Peg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The shelf support pegs in my bathroom vanity were always falling out, so I modelled and printed some that would fit a…
- Rating
- 3 / 5
- Likes
- 24
- Downloads
- 264
- Makes
- 1
- Views
- 1,073
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The shelf support pegs in my bathroom vanity were always falling out, so I modelled and printed some that would fit a little tighter. They seem to be working so far.
The peg has a diameter of 5mm
The platform that holds the shelf was around 2mm thick on the original clip. In my design, I beefed it up to 3mm. I've included the STL that I used and a thin one that sticks to the original 2mm thickness.
Print instructions
Supports: No
Resolution: 0.1 mm
Notes:
Print the flat side down. Use a brim if you find that the end of the peg is warping