Shelf Support Peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The shelf support pegs in my bathroom vanity were always falling out, so I modelled and printed some that would fit a…
- Ocena
- 3 / 5
- Polubienia
- 24
- Pobrania
- 264
- Wydruki
- 1
- Wyświetlenia
- 1073
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The shelf support pegs in my bathroom vanity were always falling out, so I modelled and printed some that would fit a little tighter. They seem to be working so far.
The peg has a diameter of 5mm
The platform that holds the shelf was around 2mm thick on the original clip. In my design, I beefed it up to 3mm. I've included the STL that I used and a thin one that sticks to the original 2mm thickness.
Print instructions
Supports: No
Resolution: 0.1 mm
Notes:
Print the flat side down. Use a brim if you find that the end of the peg is warping