6mm scale Skyscraper - Taffy Tower - BattleTech Compatible
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original work designed to be compatible with BattleTech and other 6mm Games.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 236
- Makes
- 1
- Views
- 902
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings.
My own original work designed to be compatible with BattleTech and other 6mm Games. In BattleTech map scale, this is a 1 hex building that is sectioned so you can stack it from 3 levels to however high you want to go. Make honking huge skyscrapers!
Inspired somewhat by the Taipei 101 tower.
The files:
- GroundFloor.stl - print one of these to make your ground floor. (1 BT level)
- MidLevel.stl - print as many of these as you want and stack on the ground floor. (1 BT level each)
- Topper.stl - make the spire. (about 1 ½ levels)
Very tall stacks will be easy to knock over, so you may want to add magnets or use removable glue for play.
This is a Work in Progress, but I successfully have printed this on a mini+.
For all of my buildings, I recommend 1.2mm wall thickness. I design them to be “acceptable” at .2mm layer height for FDM printers.
No supports needed if you've got your settings dialed in, but I always use a brim.