DC Motor Mod for V-Spooler 1.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DC Motor mod compatible with the latest version of V-Spooler 1.0. Easy to print and install, works perfectly.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 143
- Makes
- 0
- Views
- 1,868
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I made it possible to use the DC Motor Mod with the latest version of V-Spooler 1.0.
Other published motor mods are incompatible, so I had to make some changes.
✔ I used the cheapest motor ZGA37RG from Aliexpress (https://aliexpress.ru/item/32587420240.html?spm=a2g2w.orderdetail.0.0.4ecc4aa6JsgZbt&sku_id=12000025482130554): 12 volts, 150rpm.
It turned out that the power and torque of this motor is more than enough, the spools spin perfectly.
✔ I also use a power supply Mean Well RS-25-12 (https://aliexpress.ru/item/4000508207207.html?sku_id=12000033333882170&spm=a2g2w.productlist.search_results.0.7f541198v0ZNcE), for it I made a special case to place it nearby.
✔ To connect the motor and drive axel and gear I made a special adapter (I recommend to print it with 100% filling for reliability).
✔ All parts from V-Spooler 1.0 are remained unchanged except for the Motor Gearbox Cover - I made some additional holes in it so that the motor holder could be attached to it.
✔ I also add here a modified version of Brace Rear Bottom - I made special holes in it for attaching V-Spooler to the board.
How to print:
Material: any strong material (I made with PLA)
Layer height: 0.2mm
Number of walls: 3
Number of bottom layers: 4
Number of top layers: 4
Filling: 30% for all the parts and 100% for adapter
Supports: required for Power Supply case and for Motor Mount
Brim: not required