Stealth Magnetic Leash Hangar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Conveniently hang leashes on the banister by your front door.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
Update: Feb. 27, 2026
LeashHangarV2.
The magnets I used are from Harbor Freight. For V2, I made this model a bit wider (5mm increase) and reduced the distance between the latch arms 0.75 mm for a tighter fit. Printed in PLA, but would probably be better in PETG. Supports are not really necessary.
----
This is a bracket that fits on the underside of a 6010 stair rail. It has embedded magnets which hold a metal prong collar. Slots are to add flexibility for attaching it to the rail.
Put a pause at 4.80mm to insert magnets. Use 2 magnets stacked per hole for stronger holding power.
The model marked ‘holes’ has 3 holes for 8 x 2 mm Harbor Freight magnets. Though we have 3 leashes, I have a hangar on each side of the stairs, one with 1 magnet, the other with 2 magnets.
The model marked ‘solid’ has no flexibility slots or magnet holes. You can create slots/holes for your sized magnets in the slicer.
Printed with 0.20 layer height and the ‘latches’ oriented up. Printed mine with painted on supports for the top, but YMMV.
Note: The snap hook on most leashes is not magnetic, but the Sprenger prong collar is.