Speeduino Ocelot Simple Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For the Ocelot ECU from WMTronics. Simple case that Should get you started.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 0
- Views
- 679
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
For the Ocelot ECU from WMTronics.
Simple case that Should get you started. This is my first contribution to the Speeduino Community.
There were enough tolerances in the design that I was able to take this part straight off the print bed and throw the ECU in. I hope this will be the case for you as well. Files should be orientated to their intended print bed placement.
Both of the tops will require you to drill a hole for onboard map sensor (if in use). The top with Bluetooth has a slot to slide in the typical dongle that you plug into your ecu.
The bottom is thicc and you will have to drill holes for your own mounting purposes. I was able to reuse mounting bolts/holes from my stock ECU.
Slice, print, install, ride. That was my goal here :D