Stand for Dremel 3000 with Mini Saw Attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Stand for Dremel 3000 with the Mini Saw Attachment, not for the standard front part.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 47
- Makes
- 0
- Views
- 733
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A Stand for Dremel 3000 with the Mini Saw Attachment, not for the standard front part.
It may work with the Dremel 4000 (with Mini Saw Attachment) but I couldn't test it.
This remix will only work with this Mini Saw Attachment front part https://www.dremel.com/gb/en/p/dremel-mini-saw-attachment-26150670jd .
If You want an stand for the standard Dremel 3000 front part, please check out the original model: https://www.printables.com/model/866621-dremel-stand
If You want an stand for the Detailer's Grip Attachment front part, please check out my other model:
https://www.printables.com/model/1012234-stand-for-dremel-3000-with-detailers-grip-attachme
You can screw the base of the holder directly to your workbench, or any piece of wood.
Printing:
The two Lid-parts need support, I used organic support for it. I printed it with PLA, 3 perimeters and 20% gyroid infill for good stability.
Assembly:
Connect the base with the two lids by pressing in the printed pins, after breaking them away from the printing support (alternatively M4 screws should also work).
Insert two M5 heat insert nuts to the base part.
To use the printed screw housings, use two M5x40 screws with 8mm hexagon head. Push them through the one solid layer, which is for support during printing. Secure them with a bit of glue and push the lid on (may require some fore, a hammer or so). I only had screws with taller head at home, so it looks a bit wrong in the pictures.
Big thanks to Tomcat54 for the original model.