Schiebetürschiene / Floor rails for sliding glass door
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bodenschienen für Glas-Schiebetüren, Marke unbekannt. Floor rails for a sliding glass door, manufacturer unknown.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 1
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Dies sind Austausch-Schienen für eine Glas-Schiebetür, Marke unbekannt. Dies ist keine 1:1-Kopie, sondern stellt nur die Funktion wieder her und ist etwas robuster gehalten als das Original.
Das Modell funktioniert in PLA, aber härtere/schlagzähere Kunststoffe sind besser, etwa Prusa PETG oder ABS. Mit mind. 40% Füllgrad drucken, Stützen sind nur für das Unterteil erforderlich (Aufmalstützen). Oberteil auf der flachen Seite liegend drucken.
Die Schiene besteht aus einem Unterteil und einem Oberteil (letzteres zusätzlich in einer längeren Variante), sowie einem Schließblech. Das Schließblech ist jedoch nur als Provisorium anzusehen, besser man stellt sich hier Ersatz aus 1,7 mm Blech her.
Das Unterteil hat eine Aussparung für eine M4-Rechteckmutter. Diese kann nötigenfalls vom Original übernommen werden. Eine M4-Schraube kann dann das Oberteil festhalten.
This is a replacement for the rails of a glass sliding door, manufacturer unknown. This is not a 1:1 copy, but rather restores the functionality and is more sturdy than the original.
This model works in PLA, but plastics that are harder or more sturdy would be better, like Prusa PETG or ABS. Print with at least 40% infill. Supports are only necessary for the lower part (paint-on supports). Print the upper part lying on the flat side.
The rail consists of a lower and a upper part (the latter also in an elongated version) and a piece for the door lock. That piece should be considered makeshift, it would be better to make that in 1.7 mm steel or iron.
The lower part has a a facility to hold a M4 square nut, which can, if need be, taken from the original. A M4 screw can then hold the upper part in place.