Legs for furniture (10, 15, 20, 25, 30, 35 and 40cm)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.38 – €5.35 net (excluding VAT)
For file: leg-30cm_0.4n_0.2mm_PLA_MK4IS_3h14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.87 excluding VAT (range midpoint).
- Weight reported by the author
- 95 g
- Print time reported by the author
- 3.23 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I needed a table for my 3D printer, so I took a wooden board and printed the legs.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 60
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I needed a table for my 3D printer, so I took a wooden board and printed the legs. And because the legs are 30cm high, I had to assemble it in two parts.
I ended up making a few more variations for others. So choose the right type (according to the size of the screws) and the length of the parts. From the models shown, you can assemble legs of 10, 15, 20, 25, 30, 35 and 40cm. If you need a different length, just email me.
Option A is for 3mm screws.
Option B is for 5mm screws.
Use a layer height of 0.2 mm - the parts hold together perfectly.