1 / 6
Wall Spacer or Corner Mount for TP-Link EAP615, EAP225, EAP235
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
fully parametric FreeCAD model to generate a wall-spacer or a corner-mount for corners of 60° to 180°
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 103
- Makes
- 2
- Views
- 611
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
- printing works with nozzle size up to 0.6mm and layer height 0.32mm
- spacer can be fixed to wall with screws or double sided tape using the flat area
- flat wall model does not need supports
- for wall corner models the use of automatic paint-on supports only, is recommended
Please post a make, if you like the model. I would very much like to see it in use.
FreeCAD model can be configured in following ways
- mount in wall corner for all degrees of wall, even 180° for flat wall is possible
- size of cable hole or no hole at all
- depth for fitting panel mount or no depth for better printing
- distance of screws
- screw sizes
- dimensions to fit other APs
there are several pre-defined configurations, which can be selected from the Body property mount_configuration drop-down
If you need a specific wall corner configuration and don't want to run FreeCAD, just ask.