1 / 6
Gehäuse für/ Housing for Forumslader V5 kompakt — image 1
1 / 6

Gehäuse für/ Housing for Forumslader V5 kompakt

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.04 – €0.04 net (excluding VAT)

For file: Fenster (transparent)_0.4n_0.2mm_PETG_MK3.5_1m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.04 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
1.2 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Gehäuse für das Fahrradladegerät Forumslader V5/ Housing for the Forumslader V5 bicycle charger

Rating
0 / 5
Likes
0
Downloads
18
Makes
0
Views
200
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

For English see below


Es handelt sich um ein Gehäuse für den Forumslader V5 kompakt:
https://www.forumslader.de/aeltere-versionen/automatiklader-v5/

Der Forumslader ist ein effektives Ladegerät zum Laden von Mobiltelefonen/ Tablets für Fahrräder mit Nabendynamo. Ich denke, dass dieses Gehäuse sehr speziell ist, da wahrscheinlich nicht viele Leute genau dieses Ladegerät haben. Dennoch kann der eine oder andere Maker sicher Anregungen in der Konstruktion finden.

Das Gehäuse sollte recht kompakt sein, nicht vollkommen wasserdicht, aber ein paar Regentropfen vertragen. Die Bauteile im Inneren werden mit Kabelbindern befestigt (im Bild noch nicht zu sehen), entsprechende Laschen sind vorhanden. Es gibt ein transparentes Sichtfenster für die LED und einen Druckknopf aus TPU für den Taster. Der Taster ist mit Schrauben befestigt, die in Einschmelzgewinde eingeschraubt sind. Der Deckel ist mit einer Dichtung aus TPU versehen und wird mit Schrauben verschlossen. Hierfür sind ebenfalls Einschmelzgewinde verbaut. Die Einbaubuchsen USB/ Stromversorgung wurden mit 2K-Kleber befestigt.

 

Translation: DeepL

This is a housing for the Forumslader V5 kompakt:
https://www.forumslader.de/aeltere-versionen/automatiklader-v5/

The Forumslader is an effective charger for charging mobile phones/tablets for bikes with hub dynamo. I think that this housing is very special, as probably not many people have exactly this charger. Nevertheless, one or the other maker can certainly find inspiration in the design.

The housing should be quite compact, not completely waterproof, but able to withstand a few raindrops. The components inside are fastened with cable ties (not yet visible in the picture), corresponding tabs are provided. There is a transparent viewing window for the LED and a TPU push-button for the push-button. The push-button is fastened with screws that are screwed into melt-in threads. The cover is fitted with a TPU seal and is closed with screws. Melt-in threads are also used for this. The USB/power supply sockets are attached with 2-component adhesive.

Tags