Gehäuse für/ Housing for Forumslader V5 kompakt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,04 € – 0,04 € netto (bez VAT)
Dla pliku: Fenster (transparent)_0.4n_0.2mm_PETG_MK3.5_1m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,04 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 1,2 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Gehäuse für das Fahrradladegerät Forumslader V5/ Housing for the Forumslader V5 bicycle charger
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For English see below
Es handelt sich um ein Gehäuse für den Forumslader V5 kompakt:
https://www.forumslader.de/aeltere-versionen/automatiklader-v5/
Der Forumslader ist ein effektives Ladegerät zum Laden von Mobiltelefonen/ Tablets für Fahrräder mit Nabendynamo. Ich denke, dass dieses Gehäuse sehr speziell ist, da wahrscheinlich nicht viele Leute genau dieses Ladegerät haben. Dennoch kann der eine oder andere Maker sicher Anregungen in der Konstruktion finden.
Das Gehäuse sollte recht kompakt sein, nicht vollkommen wasserdicht, aber ein paar Regentropfen vertragen. Die Bauteile im Inneren werden mit Kabelbindern befestigt (im Bild noch nicht zu sehen), entsprechende Laschen sind vorhanden. Es gibt ein transparentes Sichtfenster für die LED und einen Druckknopf aus TPU für den Taster. Der Taster ist mit Schrauben befestigt, die in Einschmelzgewinde eingeschraubt sind. Der Deckel ist mit einer Dichtung aus TPU versehen und wird mit Schrauben verschlossen. Hierfür sind ebenfalls Einschmelzgewinde verbaut. Die Einbaubuchsen USB/ Stromversorgung wurden mit 2K-Kleber befestigt.
Translation: DeepL
This is a housing for the Forumslader V5 kompakt:
https://www.forumslader.de/aeltere-versionen/automatiklader-v5/
The Forumslader is an effective charger for charging mobile phones/tablets for bikes with hub dynamo. I think that this housing is very special, as probably not many people have exactly this charger. Nevertheless, one or the other maker can certainly find inspiration in the design.
The housing should be quite compact, not completely waterproof, but able to withstand a few raindrops. The components inside are fastened with cable ties (not yet visible in the picture), corresponding tabs are provided. There is a transparent viewing window for the LED and a TPU push-button for the push-button. The push-button is fastened with screws that are screwed into melt-in threads. The cover is fitted with a TPU seal and is closed with screws. Melt-in threads are also used for this. The USB/power supply sockets are attached with 2-component adhesive.