1 / 2
IKEA LACK Prusa Sheet Storage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage for three Prusa printbed sheets for IKEA LACK table
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 68
- Makes
- 3
- Views
- 351
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 27/05/26: added 5 sheet version (on request of @Stsfin_4937)
This is a storage solution for three Prusa printbed sheets (which measure about 241.5x254.5 mm) for the underside of an IKEA LACK table (works even with a smaller variant, as pictured). The slots are angled slightly from the table surface so that sheets don't slide out on their own.
As a bonus, parts' size is optimized so that both of them can be printed simultaneously on Prusa MK1/2/3/4 bed.
Use four M4x20 screws to secure the parts to the table after printing.