1 / 12
Lego technic Ferrari F40 wheel (Sp3 or 1/8th size) — image 1
1 / 12

Lego technic Ferrari F40 wheel (Sp3 or 1/8th size)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Those are 75.1mm D. x 40.4mm Lego compatible rims that are made to look like Ferrari F40 wheels !

Rating
5 / 5
Likes
45
Downloads
524
Makes
3
Views
2,424
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Don't have acces to a 3D printer ? You can purchase them here !

This is a 3d model of some Lego compatible F40 style rims to use on 1/8th scale cars, specifically on the Ferrari F40 by Loxlego, but they should work on other models like the Lego Sp3.

Using normal pins would have either been too fragile or take too much space for my liking, so instead I created a little nub in the center that fits inside a normal Lego caliper/axle piece and holds the wheel using just friction, like so:

 

 

 

 

 

 

 

 

 

 

 

(I provide a test piece to make sure this nub fits onto your car just right, it has a little square outside the nub so that the slicer prints it in the air using supports, so that you can recreate real printing conditions)

 

Print settings / recommendations:

I printed mine using standard PLA, I used the variable layer height feature in Orca slicer to print most of the model at 0.2mm layer height and some other parts like the top of the rim and some steep overhangs for the tire groove on the outer surface of the rim at a lower layer height (0.08mm worked well for me).

Use 0.2mm for the white layers.
Use 0.08 for the green layers.

 

I recommend using scarf seams if you have them dialed in good enough, I haven't tried using ironing, but it could probably look good too.

You will also need to use supports for the underside of the rim, but the outside should be able to be printed without.

Tags