Daft Punk "STARBOY California" Numberplate
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.09 – €3.78 net (excluding VAT)
For file: daft punk starboy layer change mk4_0.4n_0.2mm_PLA_MK4_2h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.43 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 2.95 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This 3D printed model is a faithful reproduction of an iconic license plate. Inspired by Daft Punk and The Weeknd.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 22
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is designed to be printed with a few filament swaps.
The model should be printed with a layer height of 0.2mm.
You start by printing in red up to layer 4, at 0.8mm.
Then, you swap the filament to white and print up to layer 11, at 2.2mm. After that, you do the final filament swap, changing from white to blue, and let the print finish completely.
The end result will look as if it was printed with a multi-material unit.
Of course, there’s also a version of the model that can be printed using an MMU, where you don't need to manually swap filaments. To print the multi color one on a Prusa MK4 with mmu the model need to be scaled down to 80%, on a Prusa XL you can leave it at 100%
Happy printing!