1 / 4
Lego | The Milky Way | Invisible wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A command hook wall mount for 'The Milky Way' Lego set
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 87
- Makes
- 0
- Views
- 640
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
This is a really simple print that uses some mid print M3 Nuts and two 10mm M3 bolts to firmly secure “The Milky Way” Lego set to the wall.
Most of the weight is held by the main body of the print where it juts out, distributing the weight across the two pairs of high strength velcro command strips. The M3 bolt prevents the whole set from coming off the wall unless it is lifted up first.
This is printed in eSun PLA+ and I have provided a Gcode file for the Prusa Mini. No supports are required and I printed with 0.2mm layer height and 20% infill.
