1 / 2
Water bulb nozzle for Gatorade, Pure Leaf, & Bai bottles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple nozzle for use in gardens or wherever you need it. Will fit on Gatorade, Bai, Pure Leaf and similar bottles.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 98
- Makes
- 0
- Views
- 371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prints best if you use the Adaptive layers feature. Assuming a 0.4mm nozzle, use a minimum layer height of .15mm and an upper layer height of .25mm so it can print the threads well, but also print the thin end quickly. 100% infill works best.
Support should be normal support, touching buildplate, with a support interface layer so it pops off easily. Setting the angle to 55° works well.