1 / 2
Water bulb nozzle for Gatorade, Pure Leaf, & Bai bottles — zdjęcie 1
1 / 2

Water bulb nozzle for Gatorade, Pure Leaf, & Bai bottles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple nozzle for use in gardens or wherever you need it. Will fit on Gatorade, Bai, Pure Leaf and similar bottles.

Ocena
0 / 5
Polubienia
13
Pobrania
98
Wydruki
0
Wyświetlenia
371
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Prints best if you use the Adaptive layers feature. Assuming a 0.4mm nozzle, use a minimum layer height of .15mm and an upper layer height of .25mm so it can print the threads well, but also print the thin end quickly. 100% infill works best. 

Support should be normal support, touching buildplate, with a support interface layer so it pops off easily. Setting the angle to 55° works well. 

Tagi