1 / 1
Hitch snubber 2"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hitch snubber to prevent rattle for 2"
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Print ASA or TPU 100% infill.
Works best when sandwiched between existing rubber and steel anti-rattle spacers. If your hitch doesn't have a pre-load screw for loading the spacer after installing the cross pin, you will need to leverage the hitch into position with a punch. When the pin is installed, it should be tight to get best results.
Or print minimum 6mm thickness ASA for both sides, with middle part TPU with varying infill (35%) to add compression.
Minimizes hitch rattle.