Mini Hex Ratchet Driver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini Ratcheting Screwdriver with magnet slot
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 73
- Makes
- 0
- Views
- 574
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Please Print version 2, which is a print-in-place model:
https://www.printables.com/model/1092739-print-in-place-ratcheting-driver
Thanks to PCBWay for sponsoring the project and for shipping the steel and sls parts! Check them out at https://www.pcbway.com/ for 3D Printing, CNC and PCB manufacturing services for cheap and at high quality.
-Hardware:
-1x Bearing (12mm ID, 24mm OD, 6mm Depth)
-1x Magnet (5mm diameter, 2mm depth)
-Print outer part with PETG. Inner gear can be any material.
-Magnet may need a drop of CA glue to prevent it coming out with the hex bit
-Absolutely cranking it will cause the petg pins to buckle. Your mileage may vary based on your PETG. (be careful with it)
Design Iterations:
.F3D and .STEP files
