1 / 7
5 Gallon Adapter for Modular Hydroponic Tower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5 US gallon bucket adapter that can fit regular(smaller) printers. Largest dimension is 225.25mm in X or Y direction.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 97
- Makes
- 0
- Views
- 769
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter for the modular hydroponics tower: Modular Hydroponic Tower Garden by chrisebryan that can fit a standard 5 US Gallon bucket.
You need:
- 5G-lid (x4)
- *5G-lid-lock (x1)
- *5G-lid-notch (x1)
- 5G-lid-window (x1)
- 5G-lid-cap (x1)
- Heat inserts/M3/M4 screws (x14)
*The lock and notch models have a different tab alignment. If you accidentally(or intentionally to avoid the notch) print 2 lock and 0 notch models, it will still work as in this video:
My print settings:
- Elegoo Rapid PETG - White
- 0.2mm layer height
- 30% infill (if you have a tall tower, you can go up to 60%. The joints will be tougher to penetrate with more infill.)