1 / 1
ESP32 ethernet I/O board DIN rail housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for the ESP32 based ethernet I/O board for home automation.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 0
- Views
- 523
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the housing for the ESP32 based ethernet I/O board for home automation. There is a commercial DIN rail mount housing, but I did not wanted to modify one, so I have designed my own. Mine version is a lot smaller.
NOTE: For my design, I used regular 3.81mm screw terminals ( Degson DG381 3,81), so the ones originally used might not fit the case.
Project GitHub page: https://github.com/pilotak/eth-io