1 / 5
Blob Slicer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Print the Handle, the blade holder and the cap. You slide the blade onto the blade holder very carefully and the holder snaps into the handle. The cap slides over the blade to protect yourself. I printed the handle and the holder in PLA and the cap in TPU. No Supports needed, although you could use some brim around the bottom of the cap if you are having adhesion issues. PLEASE BE VERY CAREFUL WITH RAZORS.