1 / 6
Kenwood MC-50 5 pin mic connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5 pin 270 degree mic connector for MC-50 desk mic.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I was gifted a Kenwood MC-50 desk microphone. It was missing the coiled cable and I could not find a matching connector anywhere. So I made the insert to switch out with an 8 pin connector on a new cable.
You will need to de solder and push the pins out of one of the connectors on the new cable and carefully push them into the printed 5 pin connector insert, re solder according to wiring diagram, and reassemble. I used a small drill to make the hole for the mounting screw.
