1 / 6
Kenwood MC-50 5 pin mic connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5 pin 270 degree mic connector for MC-50 desk mic.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I was gifted a Kenwood MC-50 desk microphone. It was missing the coiled cable and I could not find a matching connector anywhere. So I made the insert to switch out with an 8 pin connector on a new cable.
You will need to de solder and push the pins out of one of the connectors on the new cable and carefully push them into the printed 5 pin connector insert, re solder according to wiring diagram, and reassemble. I used a small drill to make the hole for the mounting screw.
