1 / 3
Single Extruder - Dual Color - Pumpkin (fusion360)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Pumpkin model modified with the dual color technique. The model prints in two part that slide into each other.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example.
The stem act like a wedge, when hung the pumpkin is held together by gravity. However, it should hold as is as well due to a snug fit. Depending on how you want to display your pumpkin there is a model with and without hole in the stem.
Printing info:
- Scaling down can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first, then to scale it as you wish.
- Split the model to its parts before printing them separately then, when done, they should simply slide into each other
- As the model doesn't have a flat bottom, I recoomend using a brim and regular supports.