Milwaukee M18 Magnetic Bit Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drill & 1/4" Driver bit holder for Milwaukee M18 power tools.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 83
- Makes
- 0
- Views
- 744
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I wanted a bit holder that could hold at least 3 bits and not stick out too much or interfere with my hand while holding the drill.
Model A - Recessed mounting point that works with many Milwaukee M18 tools but not all.
Model B - Planar mounting point that works with any tool.
For best results, press four 5mm diameter by 3mm thick magnets into the slots on the backside. ¼ inch driver bits will be held with interference-fit, and smaller drill bits will stick to it with magnets.
Print with PETG, or ABS/ASA at 0.15mm layer height, no supports needed. PLA will work but may become loose over time. Model A has built-in supports that you can remove with flush cutters.
Made with FreeCAD.