DJI Osmo Pocket 3 Horizontal Clamp Mount for Movmax Blade Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple print in place horizontal mount for the Osmo3 on a Movmax Blade Arm
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 635
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Printed and tested in PA-CF, simulated a 500lb load on the part in Solidworks, just deformed, didn't snap.
Tolerances are extremely tight, 0.12mm on the hinge walls, must have a dialed in printer.
Slicing instructions (Orca):
Import both models, choose to import as one object with multiple parts, select the back side and set the z location to 0.12mm.
Print with supports only touching buildplate.
If the Osmo is a bit loose, wrap one or two layers of any sort of tape around it for a snug fit.
Use a ¼-20 bolt to clamp it together. Bottom is threaded ¼-20 to fit on a tripod or the blade arm it is designed for.
