Fixture Knob 5/16" Nut and Bolt - Dado Fixture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This knob is for a dado jig that I'm building. It allows clamping of the two parallel boards that guide the router. It…
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 85
- Makes
- 0
- Views
- 326
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
This knob is for a dado jig that I'm building. It allows clamping of the two parallel boards that guide the router. It uses a 5/16" carriage bolt and nut. the nut is pressed into the cavity. It should be tight as is but can be glued if needed. I used PETG for my knob.
I've also added a design for a larger knob that I made for my metal bandsaw tension control. It uses a 10mm hex head bolt.
These two knobs can be scaled to fit whatever size bolt or nut you need. I scaled the 10mm version down to work with the 5/16" bolt. I then changed the hole diameter.
Category: 3D Printing