1 / 6
Small Modular Hydroponic Tower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed the original because of the missing holes in the filter-spacer and the box for the pump was to small
- Rating
- 5 / 5
- Likes
- 198
- Downloads
- 582
- Makes
- 1
- Views
- 4,114
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I remixed the original because the holes in the filter-spacer were missing and the box for the water and pump was too small and without a manitance opening for pooring water and measuring the PH- and EC-levels.
Printed with PETG for water resistance.
Tip: The tank can also be coated with epoxy resin for better cleaning and watertightness.
Print list:
- 1x: Watertank and Cover Watertank
- 2x: Filter with holes, Cover
- as often as you like: Plantingmodule and Netcup
Pump: https://www.amazon.de/dp/B0BW33SMVP
Hose: https://www.amazon.de/dp/B075V7ZK5L
Angled tube: https://www.amazon.de/dp/B0B8ZSR135