1 / 4
ADT UT3G EGPU Enclosure - 250mm GPU + 120mm Slim Front Fan Support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified version of the original which allows for longer graphics cards, a 120mm front fan, and the Enhance 7660b PSU.
- Rating
- 4 / 5
- Likes
- 42
- Downloads
- 393
- Makes
- 1
- Views
- 4,207
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a slightly modified version of the original ADT LINK UT3G USB4 eGPU enclosure with the following changes:
- Adjusted height and length to support most dual-slot GPUs up to 265mm in length
- Adjusted width to fit a slim 120mm front fan (reduces GPU length to 250mm)
- Added small vent cutouts to the rear to allow better airflow for 120mm front fan
- Added support for Enhance 7660b PSU with a larger rear cut-out and side ventilation
Notes:
- I used an INNO3D 4070 Super and Enhance 7660b PSU from Velkase
- This PSU needed an adaptor for the nvidia 12VHPWR plug - I used this adaptor from AliExpress which worked well and does not heat up much
- 120mm fan has exactly 2mm width clearance. This allows it to be mounted using 1mm-thick adhesive silicone strips on each side of the fan which create a perfect friction fit. No screws needed.
- Graphics card backplates are not compatible - this was an oversight and could be easily fixed, though.
- Another small hole was drilled into the central vertical plate to allow for cable ties - this could also be added into the model itself.