Vertical Pedal Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds pedals upright for benchtop or wallmounted use
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 27
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
A niche design but extremely useful in the right contexts!
I wanted my tuner pedal and a overdrive mounted on the wall next to my workbench in my shop. (https://riffreviver.com)
This will sit on a bench top and hold pedals upright if you want to try it out, and can then be mounted with command strips or each leg has a key-hole for hanging it from a nail or sheet rock anchor and a access hole through the front.
Once hung on a wall there are holes on the bottom of the supports that can be used to route cables, or as I've done attach some ¼" jacks to keep the cables coming and going from the pedal board straight down.
Also included is a middle section, use this and extra rails to extend the board as long as you'd like.
If this is as useful to you as it is to me, please consider leaving a tip on buy me a coffee