Creality K1 Side Fan Duct booster mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I saw some ideas of this and build my own model without problems. You can use stock cam if you want and stock screw.
- Rating
- 4.667 / 5
- Likes
- 83
- Downloads
- 617
- Makes
- 6
- Views
- 1,892
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
You can use the original screw that come with it and it will work very fine, but if you want, you can put an insert too.
You can use your cam in the original spot without any problems too.
The air flow inside is distributed perfectly and evenly through the surface of the bed print.
--------------------------------------------------------------------------------------------
I printed it in my Creality K1 in 1h52m.
This was the settings i used to print in PLA and all 100%
Layer Height: 0.20mm
Wall Line Count: 3
Infill Density: 20%
Infill Pattern: Grid
Support Structure: Tree Slim
Support Placement: Touching Build Plate
--------------------------------------------------------------------------------------
Add Makes & Comments guys 👍
If you like my work consider buying me a ko-fi ☕😊 Your support is greatly appreciated.