1 / 2
Cartographer Probe Right Angle 90 Degree Assembly Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As per title, a simple Jig for assembling the 90 degree Cartographer probe.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a simple Jig for assembling the Cartographer probe in a 90 degree configuration.
Insert the JST Socket with the pins facing up, solder it to the MCU board, then flip the whole assembily over and solder the 90 degree pins to the coil board.
The coil board can be held in place with 2x M3x6 Screws (the ones from the carto packaging work)
Printed & Tested in PLA with a ,2 Layer Height, no fancy support/infil needed, 10% triangle is fine & 3 walls/top/bottom layers.