1 / 1
Lupine_Neo_mounting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handlebar mounting for Lupine Neo LED headlight (31,8 mm)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 37
- Makes
- 0
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Hi,
this is a small handlebar mounting for the Lupine Neo headlamp. It consists of the mountings R+L, optional spacers and TPU washers… (Diameter of the handlebar: 31,8 mm)
You need additional screws (M3 x 30 mm, hex) and 2 nuts (M3).
Material: PLA, PETG, ASA should work. Flex TPU (e.g.) for the Flex washer
Edit: The Rev_5 is a bit thicker around the LED mounting screw.
Have Fun!
Köter