Christmas Light Hanger for Fascia
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Christmas light hanger that attaches to aluminum fascia without the need for nails or screws.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 91
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Christmas light hanger meant to lock into aluminum fascia and hold strong but also be easily removable if needed.
There are no screws or nails needed!
I slipped mine between the channels in the soffit about one every 16 inches. With it being in the channels, this helps hold the hanger in place and keeps it from sliding if on a peak. To remove, just pull back off, you might need to wiggle it a little.
I have tested this on 2 types of aluminum fascia and it worked with both. If you have any questions, please ask and I will do my best to assist you or remodel it for you!
Don't forget to post your makes and get your Prusameters!