Astrophotography Telescope PWM 12v Control Box - Dew Heaters / Fans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Astrophotography 12v Control Box - Dew Heaters / Fans utilizing PWM (pulse width modulation) speed controller
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 17
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Share Alike
Astrophotography 12v PWM Control Box - Dew Heaters / Fans utilizing PWM (pulse width modulation) controllers for astrophotography telescopes.
Control 4x Dew Heaters or Fans or both with this unit.
COMPLETED for about $20
Retail PWM controllers are pretty expensive so why not make your own for about $20 with little effort.
Here is a PWM controller on two circuits controlling 2x sets of 2x outlets. I have used a total of 3x 12v outlets and 1x RCA jack outlet but you can wire up whatever combination you want.
A 12v side indicator shows the current input voltage.
Both PWM controllers can be isolated by two gang toggle switches on the rear side creating two circuits.
Any DC voltage input unit of 5-24v can be controlled and with this specific PWM unit 4x frequencies available.
If you want a wiring diagram showing how I did mine just send me a message.
You will need;
1. 2x PWM Controllers (Dimmer 5V 12V 24V 10A/30A PWM Frequency Adjustable)
2. 4x DC 12v Connectors (DC Connectors 5.5x2.1mm) + 1x RCA Jack
3. 1x DC 12v voltmeter (DC4-100V LED Display Circular Two-wire Automotive Voltmeter Digital)
4. M3 Knurled Nuts (x12) + M3x8 Screws (x12)
5. M5 Knurled Nuts (x4) + M5x20 Screws (x4)
6. Wire
Links to the parts I used are included. If they expire just search for the same on the website.
Pulse width modulation (PWM) is a modulation technique that generates variable-width pulses to represent the amplitude of an analog input signal, providing continual 12v supply.