8 inch phantom printing press with print settings and beds layed out.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes procrastinating when making a phantom press harder :)
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 144
- Makes
- 0
- Views
- 1,005
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
all credit to the original designer, I just sliced up the model in bambu so it's a littler easier to print and get started, I also consolidated the materials list so it is less easy to procrastinate.
---
— parts list
- [ ] 2x press body
- [ ] 3x pressure knob
- [ ] top roller (hex)
- [ ] bottom roller
- [ ] 2x bed support
- [ ] Gearbox cover
- [ ] Crank gear
- [ ] middle and hex gear
- [ ] handle and pin
- [ ] press bed
— BOM
- [ ] 2 x 5/16x 3 inch threaded rod
- [ ] 2 x 5/16 lock nuts
- For my metric friends two 8mm-1.25 x 100mm threaded rods and two 8mm-1.25 lock nuts.
- [ ] Spring this one
- [ ] super glue
- [ ] lubricant (I used lithium grease, but any PLA/plastic safe lube will probably work)
I was able to acquire everything at menards, most hardware stores should be able to get you need except maybe the springs,
—
two print changes I would consider, making the model 100% density around where the threads fit in, there was some disconcerting cracking and squeaking, and adding a brim around the press body, I had a very minor issue with warping that only effects looks.
I had an extra piece of wood for the base, you do need one, it should be very easy to design and print, I don't believe the default one will work because it is made for the 6 inch stand. It would make a good first fusion or solidworks project!