Pragotron Controller Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hey Makers,this is compact controller box for Pragotron / Elektročas Clocks. Electronics of controller uses a 5V power…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Hey Makers,
this is compact controller box for Pragotron / Elektročas Clocks. Electronics of controller uses a 5V power supply source/USB adapter. Many thanks to Miroslav Urban for firmware and electronic design.
2026/01 - new firmware version + wiring diagram available
firmware + wiring diagram is NOT my work, big thanks to Miroslav Urban for his work!
GitHub project page
https://github.com/Mira80/PragotronPro
older Instructables guide
https://www.instructables.com/Pragotron-Generator-Pulzu/
bill of material XL6019(upgrade)
https://www.aliexpress.com/wholesale?SearchText=XL6019+XL6009+upgrade
L298N driver board
https://www.aliexpress.com/wholesale?SearchText=L298N+driver+board
LOLIN D1 Mini
https://www.aliexpress.com/wholesale?SearchText=d1+mini
Dual Base V2.0.0 for LOLIN (WEMOS) D1 mini
https://www.aliexpress.com/item/32642733925.html
D1 Mini OLED Shield
https://www.aliexpress.com/wholesale?SearchText=d1+mini+oled+display+shield
USB-C Board
https://www.aliexpress.com/item/1005002320414960.html
OR Micro USB Board
https://www.aliexpress.com/wholesale?SearchText=CJMCU+Micro+USB+Board
M3 Screw and M3 Heated insert M3 x OD5.0 x H4.0
https://www.aliexpress.com/item/1005002615923810.html
10pcs Self-Tapping Screws 2,2x6,5mm
https://www.google.com/search?q=Self-Tapping+Screws+2%2C2x6%2C5
If you would like to support my designs to give me a small tip, click on this link. PayPal donate button.
Or You can send me a small tip ₿ Bitcoin to the following address:
bc1qeqhefz33msdxs7hq69g72aspe9q5rlm2jxks04